Used Equipment Sales

Dgen Teleios Black direct-to-textile printer with in-line heat fixation unit

Printheads: 2 x Epson piezo printheads - staggered

Maximum Print Width: 2,500mm

Maximum Resolution: 1,440dpi

Maximum Printing Speed: 64m²p/h (2 pass), 32m²p/h (4 pass)

Media Feeding System:

• Rubberised rollers & dancing bar textile support system,
• Media roll diameter: Maximum 350 mm (13.7 inches)

Media Take-Up:

• Motorised take up, media roll diameter
• Maximum 300 mm (11.8 inches)

Ink Type: Dgen direct dye-sublimation

Electrical Power:

• Printer: 0.44kW, AC 220-240V, 3.6A, 50/60Hz
• Fixation: 8.6kW, AC 380V, 3phase 3N+PE, 15A, 50/60Hz
• Fume buster runs off the fixation electrical supply

Extraction: Fume buster unit needs to be connected to an outlet pipe (<10 metres long to outlet)

Operational Environment:

• Power on - Temperature : 16~24℃ / Humidity: 35~80%
• Power off - Temperature : 5~40℃ / Humidity: 20~80%

Weight & Dimensions: 3,500 (W) X 1,300 (D) X 1,400 (H) mm, weight 1,800kg

Software: Wasatch - Step and Repeat Facility, Dye-stuff & media consumption calculation, Pre-Installed Colour Profiles

Photos

MINIMAL USAGE – GREAT CONDITION

SN: S456B227

USAGE: 6,500M2

DOM 2015

Printheads –

• On-demand piezo heads (4 in-line Panasonic)
• Cutting edge head height adjustment from 2-7mm
• Automatic nozzle checking system

Print Width: 1,940mm maximum

Media Width: 1,950mm maximum

Resolution: 360dpi, 540dpi, 720dpi, 1,080dpi

Printing Speed: Maximum 115m²p/h (38m²p/h 4pass 720x720dpi)

Media -

• Feeding System: Automatic Media feeder (AMF) for stable feeding
• Acceptable media: Dye sublimation transfer paper
• Inc. sheet off disc-cutter blade
• Max. width: 1950 mm
• Media thickness: 1.0mm or less
• Rolled media weight: 40 kg (88 lb) or less

Ink -

• Type: Mimaki SB410 dye sublimation 4 or 6 colour
• 4 colour mode: 2 x BMYK
• 6 colour mode: BMYK + (Lc + Lm) or (Fpink + Fyellow)
• MBIS3 (Mimaki Bulk Ink System) included as standard – 2 litre ink refills

Certification –

• VCCI class A, FCC class A, ETL UL 60950-1
• CE Marking (EMC, Low voltage, Machinery directive, and RoHS),
• CB, REACH, Energy Star, RCM

Electrical -

• Power supply: Single-phase (AC100 - 120V / AC200 - 240V)
• Power consumption: AC100V : 1.44kW / AC200V : 1.92kW

Interface –

• USB 2.0 Hi-speed / Ethernet 1000BASE-T

Weights & Dimensions -

• Size: 3,650 x 1,302 x 1,424 mm
• Weight: 465 kg

Operational Environment –

• Temperature: 20 - 30 °C (68 - 86 F°)
• Humidity: 35 - 65% Rh (Non condensing)

RIP software:

• Bundled Ergosoft TxLink3 lite
• Spot colour can be assigned to each colour on separation plates.
• ICC profi­le creation from CMYK + spot colours.
• Colour replacement on raster data
• A variety of panelling functions, including step-and- repeat layout, which are useful for textile designing.

Photos

Industrial direct to textile digital textile printer

• Type: Direct to textile
• Width: up to 1.88m
• Printheads: 3 x industrial Ricoh G5
• Resolution: up to 2,400dpi
• Printing Speed indication: 
• (High speed draft 52m2ph 900dpi)
• (Production 40m²ph 1200dpi)
• (High Quality 28m²ph 1800dpi)
• Ink:
• Type: disperse sublimation/ pigment
• Colour: 6 colour (C,M,Y,K, + Or,Tq,Bl)
• Supply: 5kg bulk ink supply system
• Fabric feeding: Dgen patented rubberised rollers & take up bar
• Front heater/dryer included
• Caldera RIP software included
• 1 year full warranty

Photos

Video

Grade A i-SUB Showroom Dye Sublimation Transfer Printer

*1 The media holder for this machine is exclusively designed for media rolls with a paper tube measuring 76.2 mm (3 in.) in diameter. To use 50.8 mm (2-in.) media rolls, the optional media flanges are required.
*2 The length of the production run is subject to the limitations of the software program. 
*3 Media type: Media specified by Roland DG Corp. Temperature: 25°C (77°F), humidity: 50%. Roll media must be loaded correctly. Excluding expansion/contraction of the media. All corrections or adjustment function of this machine have been made properly. Print travel: 1 m.
*4 Warm-up is required after the power is turned on. This may require 5 to 20 minutes, depending on the operating environment. Depending on the ambient temperature and the media width, the set temperature may not be reached.
Please note: an external dryer unit may be required depending upon printing and environmental conditions.
Specifications, designs and dimensions listed may be subject to change without notice.

• 300cm Oven / Tunnel
• 120cm Wide Belt
• 190cm Inlet
• 180cm Outfeed

Well maintained by customer and still in operation. Currently running on LPG but can be converted back easily.

Great first Gas Dryer or back-up dryer for an existing owner of a similar model.

Demonstrations available.

Prices & further information on request.
Please call 01536 415511, or email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information

• Direct to textile printer for flag & banner printing.
• Fast print speeds of up to 64m²p/h (16-32m2p/h approx. production) 1.8m width
• Includes in-line heat fixation for increased productivity and reduced footprint.

Images

Prices & further information on request.
Please call 01536 415511, or email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information

Rotary calendar heat press + loading table

Suitable for:

• High Production Sublimation Printing
• Roll to roll + Piece/piece sublimation printing
• Ø500mm diameter heated cylinder
• 2,200mm width heated cylinder
• 2,000mm working width.

Images

Prices & further information on request.
Please call 01536 415511, or email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information

• Print speed up to 115m2 p/hour
• Print width up to 1,900mm
• SB420 ink high performance at competitive price
• MBIS integrated bulk ink supply system
• 2litre refill sacks
• AMF – (automatic media feeder)
• MAPS – (Mimaki advanced pass system)
• NCU – (Nozzle checking unit)
• Ergosoft TxLink3 Lite RIP software with integrated profiler tool

Prices & further information on request.
Please call 01536 415511, or email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information

i-SUB showroom EFI Reggiani NEXT 180

• Print speed up to 400m² per hour
• Lowest running cost
• Paper transfer/ direct to textile
• Ink recycling system (95% waste ink recycled)
• Full set of inks included
• Full UK support

(Minimal use for demonstration purposes – only 500m total print)

Videos

Prices & further information on request.
Please call 01536 415511, or email This email address is being protected from spambots. You need JavaScript enabled to view it. for more information

• CCT Contour Cut VISION
• 100W RF Co2 sealed laser tube (Water cooled )
• High Resolution Scanner
• Max. cutting width: 1835mm
• Max. cutting speed: 1,000mm per/sec (up to 2g acceleration)
• Motorised material de-reeler
• Steel reinforced drive belts /Loop back servo motors /Zero backlash X belts/ Kevlar reinforced timing belts
• Hardened & ground precision motion rails/
• Single phase electrical input
• Air extraction speed control
• Honeycomb steel conveyor bed
• Ethos Cutting Composer software + Contour Cut VISION